P203 GREASE PUMP 4L 24V + M-TIMER + LOW LEVEL INDICATOR
Lincoln P203 Grease Pump 4 Liter 24V with Microprocessor Timer and Low Level Control
With the M08 microprocessor timer, the pump pause time can be set in hours. After the set pause time, the pump will run until a full greasing cycle is completed on the progressive manifold on which the cycle sensor is mounted. After this, the pump goes into its pause time again. The pump has a maximum running time of 5 minutes (monitoring time) within which the sensor must signal a detection. If this is not done within the monitoring time, the pump will stop and generate an error signal.
- Suitable for grease up to NLGI 2
- Provided with 1 pump element K6 with a flow of 2.8cc/min. Expandable to a maximum of 3 pump elements, see related products.
- Connection pump element 1/4"G
- Connection voltage 24VDC
- Connector including 10 meter cable
- Maximum pressure 350 bar
- Protection class IP65
- Temperature -25 to 75°C
We recommend using a pressure relief valve for each pump element. Click here for an overview of pressure relief valves.
See related products for a matching cycle sensor.
Lincoln Quicklub Pump P203 | |
Model | P203_E-_4XL__-600-24-006F00N0-M08A |
Model (old) | P203- 4XL -1K6-24-2A6.15-M08 |
Reservoir content | 4 Liter |
For lubricant | Bold to class NLGI-2 |
Low level control | Yes |
Reservoir type | Default / Closed |
Pump element(s) | 1 x K6 |
Supply voltage | 24V DC |
Electric connection(s) |
Left Side, Power Supply, Low Level Control & manual control with illuminated push button Right side, Bayonet 4 pole for connecting sensor(s) of distributor(s) |
Connector | Bayonet 7/5 pole with 10 meter cable |
Timer | Yes |
Lincoln Reference | 644-41312-9 |
Manual (English) | 951-171-026-EN< /strong> |
Manufacturer | Lincoln |
---|---|
Reservoir | 4 L |
Timer | Ja |
Voltage | 24 V |
Low level signal | Yes |