PUMP-LIFT-FOLLOWER PLATE UNIT PMIII 4.25" 200KG 40:1 4.5 LPM
Lincoln pneumatic Grease pump + Lift follower plate unit PMIII 4.25" model 2703
With this combination, the pump with follower plate is on top of the grease. The follower plate has a strong rubber edge that closes well along the inner wall of the barrel and scrapes all the grease with it. As a result, the space under the follower plate is completely closed off, so that the pump will not draw air bubbles, and the vessel is almost pumped empty.
When the drum is empty, air can be blown under the follower plate with a valve, so that the follower plate with pump is pressed out of the drum, after which the elevator will keep the pump up so that a drum can be exchanged efficiently.
Suitable for 180-200kg barrels
Pressure ratio 40:1
Yield at 75 cycles per minute 4.5 liters
Tutorials:
Technical specifications
- Pressure ratio 50:1
- Suitable for 180-200kg barrels
- Yield per cycle 61cc
- Yield at 75 cycles per minute 4.5 liters
- Working pressure pump-lift unit 3-7 bar
- Air connection 3/4NPT
- Exhaust 3/4NPT
- Lincoln Reference 2703
| Manufacturer | Lincoln |
|---|
